The Kaivac® All Floor™ cleaning system is designed to deeply clean high volumes of both hard surface flooring and carpeting on a single platform, with the ability to easily switch between modes for the best of both worlds. The All Floor eliminates the need for single-purpose floor cleaning machines by combining multiple capabilities into a single system.
The push-behind system is as easy as walking. With two modes, the user can easily and seamlessly transition from hard surface flooring to carpeting. In carpet mode, the trailing squeegee head acts as a “beater bar” by agitating the carpet and then simultaneously lifting all of the dust and debris. The vacuum hose pulls water from the bucket to capture dust in a slurry before being filtered in the recovery tank. In hard surface mode, the system utilizes the same technology as the AutoVac stretch™, cleaning large areas of flooring in a single pass.
Capabilities
Cleaner Floors
Cleans 25,000+ sq ft. Per hour of both carpet and hard flooring with one easy-to-use system.
Patented Water-powered Filtration
Patented water-powered filtration system integrates water as a filter, capturing and containing fine dust particles.
Quick-change Power Pack
Single or dual lithium-ion batteries enable one-to-two hours of continuous runtime with enormous cordless cleaning range.
Multipurpose Accessories
Breakaway wand, 15-foot hose, and attachments allow for multipurpose cleaning of high and low surfaces and hard-to-reach areas.
Benefits
Reduces Water and Chemical Usage
Uses up to 75% less water while reducing chemical usage by 66% or more.
Low Cost of Ownership
Replaces many units by unifying the capabilities of an auto scrubber, wet/dry vacuum, backpack vacuum, upright vacuum, and sweeper in one unit.
Easy to learn and use
Easy to learn and use with the KaiNect™ app. KaiNect offers training and maintenance videos, fleet management, usage data, and more.
Specifications
MACHINE SPECIFICATIONS
Weight: 115 lb
(H x L X W) Shipping Box Size: 44″ x 38″ x 22″
(H x L X W) As Assembled: 43″ x 36″ x 22″
Solution Tank: 10 gal (37,9 l)
Vacuum Tank: 10 gal (37,9 l)
Variable Flow Spigot: Yes
Method of Dumping: Dump Hose
Dump Hose: 26″ (66.04 cm) long
Toilet Dumping: Yes
Cleaning Width: 28″
Vacuum Motor Lift: 62″
Vacuum CFM: 77 cfm
Decibels (dB): 75 dB
Removable Motor: Yes
Pump System: No
Handle: 4 Bend Metal with Posts (removable)
Hard Rubber Tires: (2) 5″ (12,7 cm)
Casters: (2) 3″ (7,62 cm)
BATTERY SPECIFICATIONS
Battery Box Weight: 11 lb (5kg)
Battery Box Dimensions: 18″x7″x6″
Battery Storage & Operation Temperature: 32°F (0°C) to 80°F (27°C)
Battery Storage &Shipping Charge: 40-60% Charge (35-38VDC)
Battery Type: Lithium-Ion
Battery Box Voltage: 36V DC
Battery Capacity: 15 A-hr
Battery Current: 15 A DC
Approx Run Time BOL (Beginning of Life): 64 min
Approx Run Time EOL (End of Life): N/A
Opportunity Charging: Yes
Charger Amps: 4 Amps
Charger Voltage: 100-240V 50/60 HZ
Charge Voltage: 42 VDC
Battery Charge Gauge: Yes, Green or Red light
Approx Charge Cycles: 400-500 at 80% Discharge
TOOLS & ACCESSORIES
One-piece Aluminum Vacuum Wand
14″ Squeegee Head Brush
KaiTurbine™ Dry Vacuum Tool
Upholstery Tool
Training Materials: KaiNect™ App
Vacuum Hose: 7.5 ft (2,29 m) +15 ft (4,57 m) Slinky
Cleaning Pads: (5) 26.5″ wet microfiber pads with multicolor tabs
WARRANTY
Warranty – Battery: 2 Years
Reviews
There are no reviews yet.